The Connectivity Test pane appears only when the experimental features check box is enabled/disabled. From the Cisco
Step 9
SCA BB Console, you can choose Windows > Preferences. In the Preferences window, expand the Network Navigator
and click Experimental Features.
To enable the experimental feature, check the Enable Experimental Features check box. The following options appear:
Install CM server
–
Install SM server
–
The Connectivity Test pane of the SCE Software Upgrade Wizard is displayed (see
Note
If a connection to one or more devices cannot be made, or if there is a problem with the connection (such as
invalid version of the device), an error is displayed next to the device. (You can skip these tests by clicking Skip
connectivity test). The connections are validated when you click Finish.
Figure 20
Connectivity Test
Figure
20). Click Next.
29