Operator Safety - Poulan Pro PP333 Instruction Manual

OPTIONAL ATTACHMENTS
These attachments used in combination with the specified powerhead have been evaluated
to ANSI B175.3- -2003, "Grass Trimmers and Brushcutters - - Safety Requirements". These
combinations have been evaluated by Underwriter's Laboratories Inc. (UL) and are conse-
quently UL listed:
Powerhead model Attachments
Trimmer head
Grass blade/grass cutter 4-point blade,
PP333
Brushcutter attachment PP4000C
These attachments used in combination with the specified powerhead have been evaluated
to applicable ISO- - and EN safety requirement standards by the Swedish Machinery Testing
Institute.
Attachments
Edger attachment
Cultivator attachment
Blower attachment
Pruner attachment
Pruner attachment
WARNING:
When using gardening
appliances, basic safety precautions must al-
ways be followed to reduce the risk of fire and
serious injury.
DANGER:
This power tool can be dan-
gerous! This unit can cause serious injury in-
cluding amputation or blindness to the operator
and others. The warnings and safety instruc-
tions in this manual must be followed to provide
reasonable safety and efficiency in using the
unit. The operator is responsible for following the
warnings and instructions in this manual and on
the unit. Read the entire instruction manual be-
fore assembling and using the unit! Restrict the
use of this unit to persons who read, under-
stand, and follow the warnings and instructions
in this manual and on the unit. Never allow chil-
dren to operate this unit.
INSTRUCTION SAFETY INFORMATION
MANUAL ON THE UNIT
WARNING:
Do not use trimmer head
as a fastening device for the blade.
Type
WE fixed line
8" (20 cm)
diameter
Type
PP1000E
PP2000T
PP3000B
PP5000P
PP5500P
SAFETY RULES
If situations occur which are not covered in this
manual, use care and good judgment. If you
need assistance, contact contact an authorized
service dealer or call 1- -800- -554- -6723.

OPERATOR SAFETY

S Dress properly. Always wear safety
glasses or similar eye protection when op-
erating, or performing maintenance on your
unit (safety glasses are available). Eye
protection should be marked Z87.
S Always wear face or dust mask if operation
is dusty.
S Always wear heavy, long pants, long sleeves,
boots, and gloves. Wearing safety leg guards
is recommended.
S Always wear foot protection. Do not go
barefoot or wear sandals.
S Secure hair above shoulder length. Secure
or remove loose clothing and jewelry or cloth-
ing with loosely hanging ties, straps, tassels,
etc. They can be caught in moving parts.
S Being fully covered also helps protect you
from debris and pieces of toxic plants
thrown by spinning line/blade.
S Stay Alert. Do not operate unit when you are
tired, ill, upset or under influence of alcohol,
4
Cutting attachment / guard,
part. no.
545053902 / 530071919
530055892 / 530071383
952711610
Part. no.
952711607
952711608
952711609
952711612
952711672