Regular Cleaning; Choosing The Display Language - Canon SELPHY CP1000 Getting Started

Regular Cleaning

If a cleaner unit is included, you may wish to perform regular cleaning to prevent dust or dirt
from causing banding on prints. Note that the cleaner unit is not included in all regions.
• Do not touch the white strip on the cleaner. This may affect cleaning performance.
• Do not use other types of cleaners, which may damage the printer.
• If prints are affected by banding even after you use the cleaner unit, contact a
Canon Customer Support Help Desk.

Choosing the Display Language

Approx. 45°
Clean the printer.
z z
Remove the ink cassette if it is in the printer.
z z
With the arrow side face-up, slide the cleaner unit all the way
in and out of the ink cassette compartment 2 – 3 times.
z z
Store the cleaner unit in a bag or other container to keep
it free of dust.
1
Turn on SELPHY.
z z
Press the <q> button until the screen on the left is
displayed.
z z
To turn off SELPHY, hold the <q> button again until the
screen changes.
2
Raise the screen (LCD monitor).
z z
Never force the screen up more than 45°, which may
damage the printer or cause malfunction.
3
Access the setting screen.
z z
Press the <k> button.
z z
Press the <o> button.
4
Access the language setting screen.
z z
Press the <u><d> buttons to select [Language], and
then press the <o> button.
5
Choose a language.
z z
Press the <u><d><l><r> buttons to select a
language, and then press the <o> button.
Initial Preparations
9