Picture Control; Sound Control; Adjusting The Picture; Auto Picture Control - LG 21FU4RL Owner's Manual

Picture control

Enjoying the Eye Function
(some models)
The set will automatically adjust the picture
according to the surrounding conditions with the
display Magic eye .
1. Press the EYE/ button on the remote control.
The display Magic eye
picture is adjusted.
2. Press the EYE/ button again to switch the
Eye function off.

Auto Picture Control

You can select picture modes programmed at
factory as you prefer.
Using the APC button
1. Press the APC button.
2. Press the APC button to select

Sound control

Enjoying the Stereo/SAP
Broadcast(some models)
This TV set can receive MTS stereo programs and
any SAP (Secondary Audio Program) that
accompanies the stereo program, as the system to
be transmitted one additional sound signal as well
as the original one. MTS function doesn't operate in
the video mode.
Using the MTS Button
1. Press the MTS button to select your desired
MTS mode.
Each time you press this button, the
STEREO or SAP mode appears in turn.
2. Press the ENTER ( ) button to exit.
A
Notes:
• Stereo or SAP can only be received if the TV
station transmits those signals, even though you
have selected STEREO or SAP
• Mono sound is automatically received if the
broadcast is only in Mono; even though
or SAP has been selected.
• Select MONO if you want to listen to mono
sound in remote fringe areas during stereo/SAP
broadcasting.

Auto Sound Control

You can enjoy the best sound without any special
adjustment because this TV set automatically
adjusts the sound appropriate to viewing program
character by self-intelligence.
1. Press the MENU button and then use the
button to select the Sound menu.
2. Press the G and then use the
select DASP .
3. Press the G and then use the
select Flat, Music, Movie, Sports
4. Repeatedly press the MENU button to exit.
models),
3. Press the ENTER(

Adjusting the Picture

This is the function to manually adjust the desired
picture levels (
Sharpness, Tint
appears and the
picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system
PAL-M/N, the picture item
XD (some models)
XD is LG Electronic's unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
Note: When selecting APC options, XD is
automatically change to Off.
Magic eye (some
Turbo Sound (some models)
With this function sound will be more
emphasized and amplified than normal sound.
You can enjoy the Turbo sound so much better
than normal sound.
X-wave (Wireless Sound) (some models)
You can also listen to the sound through the FM receiver.
1. Press the MENU button and then use the
button the until the menu is displayed as shown
right.
2. Press the
MONO ,
select
3. Press the
select
4. Press the
X-wave menu.
5. Use the number
.
to match the TV's frequency and the FM
receiver's.
STEREO
Note:
1. If the reception is poor or weak, select a
different frequency.
2. For best results, there should be no more that
5m(16.4ft) between the TV and FM Receiver.
3. In certain areas, the FM transmitter ability may
be weak, such as near a broadcast tower.
4. The reception sensitivity may depend on the
kinds of receiver (FM radio).
AVL (Auto Volume Leveler)
/
D
E
AVL automatically keeps on an equal volume level
D button to even if you change channels.
E
/
Adjusting the treble (some models)
D button to
E
/
This function is to increase or decrease treble.
or User .
Adjusting the bass (some models)
This function is to increase or decrease bass.
7
Clear, Optimum, Soft or User
) button to exit.
A
Contrast, Brightness, Color,
) of the screen as you like. If the
Tint is not displayed.
and then use the
G D
/
X-WAVE .
G and then use the
D
/
Set Freq.
.
G button to tune in a frequency on the
0 to 9 or press the
.
/
D
E
button to
E
button to
E
F / G button