Table of Contents
Advertisement
3. Push down the release lever and
move the selector lever out of P or
N. If these positions are engaged
again, the selector lever will be
locked in position again. Have the
cause of the power supply
interruption remedied by a
workshop.
4. Mount the selector lever trim onto
the centre console and refit.
Manual transmission
To engage reverse, depress the
clutch pedal and then press the
release button on the selector lever
and engage the gear.
If the gear does not engage, set the
lever to neutral, release the clutch
pedal and depress again; then repeat
gear selection.
Do not slip the clutch unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the
pedal as a foot rest.
Driving and operating
Caution
It is not advisable to drive with the
hand resting on the selector lever.
Gear shift indication 3 114.
Stop-start system 3 202.
213
Advertisement
Chapters
Table of Contents
