Removing Accessories For Cleaning - Safety 1st Summit ISO 30 Manual

Care and Maintenance
Only replace the cover with a manufacturer's supplied
replacement cover with identical shoulder height markers
or a replacement cover meeting AS/NZS 8005.
38
TO REMOVE HEADREST TRIM
To remove the headrest trim, simply undo the
velcro at back of the headrest and pull the trim
forward.
TO REPLACE HEADREST TRIM
Fit headrest trim to seat by pulling the trim
over the headrest and push back into place,
securing velcro at back. Ensure the harness
straps are pulled to front.
TO REMOVE BELT MATES
To remove the belt mates, simply undo press
studs and unwrap from harness straps.
TO REPLACE BELT MATES
Fit belt mates to harness straps by wrapping
around straps and closing press studs.
TO REMOVE SEAT INSERT
To remove the seat insert, undo the buckle
and pull the insert out.
TO REPLACE SEAT INSERT
Feed the buckle through the opening slot in
the seat insert and fasten buckle assembly.
WARNINGS
VERY IMPORTANT: