Raymarine i70 User Manual page 7

2.3 Before using the i70
Before using the instrument under way it is important that it is
properly set up as described in the installation instruction.
First time setup
The first time the instrument is powered on only, i70 provides
on-screen instructions for the initial set up. If your instrument has
been installed by a professional installer, this process may already
have been carried out.
The first time setup screens takes you through the following:
• Language selection
• Vessel type selection
Note: First time set up may be bypassed if the data is already
available on the system, e.g. via an already installed instrument
display.
Calibrate essential data
Before using the i70 you must calibrate essential data to ensure that
the readings displayed are accurate.
Use the transducer Setup menu: Main menu > Setup > Transducer
setup to calibrate.
• Wind
• Speed
• Depth
• Temperature
You should perform the above for any installation affecting the
transducers.
Please refer to the installation instruction for details on setting up
the instrument display and associated transducers for first use.
Handbook information