Specifications - Echo PB-580H Operator's Manual

PB-580H/T
7. Allow engine to cool. Remove the spark plug lead from the spark plug.
Remove the spark plug. Pour 7 cc (0.25 oz.) of fresh, clean, two-stroke
engine oil into the cylinder through the spark plug hole.
8. Pull the recoil starter handle 2-3 times to distribute the oil inside the
engine.
9. Observe the piston location through the spark plug hole. Pull the recoil
handle slowly until the piston reaches the top of its travel and leave it
there.
10. Install the spark plug. Connect the spark plug lead to the spark plug.
11. Remove blower pipe assembly from unit.

SPECIFICATIONS

This spark ignition system complies with the Canadian
standard ICES-002.
MODEL
Length (w/o pipes)
Width (w/o pipes)
Height (w/o pipes)
Weight (dry) (w/o pipes)
Engine Type
Bore
Stroke
Displacement
Exhaust
Carburetor
Ignition System
Spark Plug
Fuel
Fuel/Oil Ratio
X7505200705
© 12/2017 ECHO Inc.
PB-580 H
379 mm (14.92in.)
537 mm (21.14 in.)
459 mm (18.07 in.)
9.4 kg (20.7 lb.)
Air cooled, two-stroke, single cylinder gasoline
46.0 mm (1.81 in.)
35.0 mm (1.38 in.)
58.2 cc (3.55 cu. in.)
Spark arrestor muffler or spark arrestor muffler
with catalyst
Diaphragm w/purge pump
Flywheel magneto, capacitor discharge
ignition type
NGK BPMR8Y (Gap 0.65 mm [0.026 in.])
Mixed (Gasoline and Two-stroke Oil)
50 : 1 Power Blend X
ISO-L-EGD (ISO/CD 13738) and J.A.S.O.
M345- FD, two-stroke, air-cooled engine oil.
SPECIFICATIONS
PB-580 T
379 mm (14.92 in.)
478 mm (18.82 in.)
9.3 kg (20.5 lb.)
engine
TM
or ECHO Red Armor
®
43