Fujitsu Lifebook S7000 Series Troubleshooting Manual page 59

Hide thumbs Also See for Lifebook S7000 Series:
Table of Contents

Advertisement

S Series.book Page 111 Thursday, February 12, 2004 4:15 PM
Problem
Possible Cause
Unavailable
network
connection
(continued)
It takes too long to
retrieve the network
and display the
connected computers.
Incorrect setting of IP
address
W I r e l e s s L A N U s e r ' s G u i d e
Possible Solution
Retrieve computers as follow:
Windows XP:
1. Click [Start] button, then click [Search].
2. Click [Computers or people].
3. Click [Computers on the network].
4. Input the name of computer to be connected with in [Computer
name] and click [Search].
5. Double-click the icon of connected computer.·
Windows 2000:
1. Click [Start] -> [Find] -> [Files and folders].
2. Click [Computer] in [Find other items].
3. Input the name of computer to be connected with in [Computer
name] and click [OK].
4. Double-click the icon of connected computer.
Check the network setting.
Windows XP: "Setting the network" on page 101.
Windows 2000: "Setting the network" on page 106
In case of using TCP/IP protocol, you can check IP address as follows:
1.
Windows XP:
Click [Start] -> [All programs] -> [Accessories] ->
[Command prompt].·
Windows 2000:
Click [Start] button -> [Program] -> [Accessories] ->
[Command prompt].
2.
In [Command prompt] or [MS-DOS prompt] window, input
[IPCONFIG] command as follows, then press [Enter] key.
Example: In case of C drive being the hard disk:
C:\ipconfig [Enter]
Check that the IP address is correctly displayed:.
IP Address................: 10.0.1.3
Subnet Mask.............: 255.255.255.0
Default Gateway.........: 10.0.1.1
When IP address is displayed as [169.254.XXX.YYY] or [0.0.0.0],
IP address is not correctly fetched from the access point. In that
case, restart the computer itself. If the display is still unchanged,
check the setting of TCP/IP.
If [Cable Disconnected] or [Media Disconnected] is displayed
without showing IP address, check the setting of network name
(SSID) and network key. Also, set the network authentication
according to the access point.
111

Advertisement

Table of Contents
loading

Table of Contents