Front/Rear Side Marker Lamps; Rear Tail, Stop, Backup And Turn Signal Lamps - Fiat 2016 500 Owner's Manual

404 MAINTAINING YOUR VEHICLE

Front/Rear Side Marker Lamps

1. Remove portion of the wheel liner to allow hand
access to side marker lamp.
2. Rotate the bulb socket counterclockwise, and remove
the bulb and socket assembly from the housing.
3. Pull the bulb from the socket and insert the replace-
ment bulb.
4. Install the bulb and socket assembly into the housing,
and rotate the socket clockwise to lock it in place.
5. Reinstall the wheel liner.

Rear Tail, Stop, Backup And Turn Signal Lamps

1. Open the liftgate.
2. Remove the two screws and remove the tail lamp
assembly.
Tail Lamp Assembly Screws