Control Panel - Schumacher SBP1 Owner's Manual

Backup power system
Table of Contents

Advertisement

Available languages

Available languages

4. FEATURES
3
2
1

5. CONTROL PANEL

LED INDICATORS
• AC Output – Green, when AC output
function is activated.
• USB – Green, when USB function is
activated.
• Error – Red, when unit is shut down
(in addition to audible alarm), due to low
battery voltage or converter overload.
See scrolling display message for more
information.
ON/OFF FUNCTION BUTTONS
• AC output – Turns AC output on or off.
• Display/Battery % – Turns on the digital
display and show's the internal battery's
percentage of charge
6. OPERATING INSTRUCTIONS
IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH USE
AND EVERY 30 DAYS, TO KEEP THE
INTERNAL BATTERY FULLY CHARGED
AND PROLONG BATTERY LIFE.
CHECKING THE LEVEL
OF THE INTERNAL BATTERY
Press the DISPLAY button to turn on the
display. The digital display will show the
battery's percent of charge. Charge the
internal battery if the display shows it is
under 100%.
4
5
6
7
8
9
10
11
• 4 •
1. 12V DC accessory port
2. 120V AC household
power outlets (2)
3. Power port for external
battery (on back)
4. Retractable handle
5. AC power cord (not visible)
6. AC output ON/OFF button
7. Display/Battery % button
8. AC Output/USB/Error LEDs
9. Digital display
10. USB ports (2)
11. USB ON/OFF button
12. Wheels (not visible)
• USB – Turns USB function on or off.
NOTE: The USB will turn off after a period
of time if no current is being drawn.
DIGITAL DISPLAY
Press the DISPLAY button to turn on the
display. The digital display will show the
battery's percent of charge. Charge the
internal battery whenever the unit is not in
use and the display read less than 100%
See Display Messages for a complete list
of messages.
NOTE: The internal battery's percent of
charge is most accurate when the unit
has been disconnected from all devices
and charging sources for a few hours.
CHARGING THE INTERNAL BATTERY
1. Make sure to turn off the 120V AC
output before charging.
2. Plug the power cord directly into a live
grounded 120V outlet (not into a surge
protector, power strip, or power bar).
Charging will start automatically.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storm 700

Table of Contents