Toshiba TransferJet J301 User Manual page 6

force or impact.
 If the Product produces an odor, overheats or smokes, immediately turn off the device with which
the Product is used, including the computer and peripherals, and disconnect the power cord from
the outlet. Do not use the Product again. Please contact the store that you purchased the Product from.
Failure to follow the instructions below may also cause malfunction, corruption, or loss of data:
 Do not touch the terminals (connection surface) directly or with metal objects, because it may cause
surges, including static electricity.
 Do not place in bathrooms or otherwise expose the Product to moisture or humidity.
 Do not expose the Product to dust, electric noise, strong magnetic fields, or corrosive chemicals or gases.
 Do not place near sources of heat or flame, or near flammable materials.
 Do not disconnect or turn off the power while data is being written or read.
 Do not remove the Product from the device with which the Product is used before processing the removal
or stop function using the device's operating system.
Although the Product comes pre-formatted in compliance with SD or SDHC Memory Card standards, you may
need to reformat the Product using the device with which you are using the Product.
Follow the instructions in the manual of the device to reformat the Product. When switching devices with
which you are using the Product, you may need to reformat the Product using the new device. Reformatting
the Product may cause all the data stored in the Product to be lost or corrupted. Ensure the Product contains
no necessary data or files before reformatting. Formatting with a personal computer may cause problems with
the Product such as the inability to read, write, or delete data. If you have such trouble, you may be able to
repair the Product by reformatting it using the SD format utility found at the following link.
(http://www.sdcard.org/jp/consumers/formatter_3/)
Notice
 For instructions on connecting and disconnecting the Product to devices with which it is to be used, refer
to the instruction manuals of the devices.
 If the Product is used in ways other than described in this instruction manual, however, data could be
corrupted or lost.
Toshiba accepts no responsibility for corruption or loss of data stored on the Product, regardless of the
type or cause of the problem or damage.
 Write protection is only applicable to the Toshiba SD memory family (SD/SDHC memory card and
SDHC/SDXC UHS-I card). If the Product you purchased has a write protection feature, set the write
protect tab on the side of the Product to the "LOCK" position to protect important data from being
accidentally deleted. This prevents data from being written to the Product. Set the tab back to its original
position (unlocked) when you want to store, edit or delete data.
 Deleting data in the Product completely by using an appropriate system or product; e.g., software for
deleting data available on the market, is recommended when transferring or destroying the Product. Even
if you delete or reformat the Product on a PC, digital still camera, or cell phone (for example), data may not
be completely removed and/or may be recoverable if the device you used for the deletion or reformatting
was not supplied with functionality that permanently deletes data from the Product. Please dispose in
accordance with local rules when destroying the Product.
TOSHIBA RESERVES THE RIGHT TO MODIFY THE DESIGN OR SPECIFICATIONS OF THE PRODUCT
OR THE PRODUCT INSTRUCTIONS OR WARNINGS AT ANY TIME IN ITS SOLE DISCRETION AND
WITHOUT NOTICE. UPDATED INFORMATION WILL BE PROVIDED VIA
http://www.toshiba.co.jp/p-media/wwsite/index.htm
* SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
* All other company product names may be registered trademarks of their respective companies.
* The card in this package is made in Japan.
© Copyright 2014 Toshiba Corporation. All rights reserved.
CAUTION
6/12
Copyright© 2015 TOSHIBA Corporation – Semiconductor & Storage Products Company