Memory Board - Brother HL-730Plus Service Manual

USER'S GUIDE

MEMORY BOARD

CHAPTER 4–6
Additional memory is useful and maybe necessary if you printing a very
complex document. Since Brother Printing Solution for Windows relies
on effective data compression to 'squeeze' a large print job into a smaller
space, there are times when data compression cannot squeeze a complex
600 dpi document into a smaller space and a resulting "Print Overrun"
error message may occur. When this occurs, you may choose to purchase
additional memory, or make changes to your printer driver settings (such
as reduce print resolution from 600 to 300 dpi, or change Half Tone
setting to Line Art or Photo Graphics).
The HL-720 series printer has 0.5 MB of memory as standard. The
memory capacity can be expanded up to 2 MB with an optional memory
board. Only one size of memory board is available as an option, giving
1.5 MB memory expansion.
The HL-730 series printer has 0.5 MB of memory as standard. The
memory capacity can be expanded up to 2 MB with an optional memory
board. Two sizes of memory boards are optionally available: 1 MB
memory expansion (giving you a total of 1.5 MB) or 1.5 MB memory
expansion (giving you a total of 2 MB). Only one memory board can be
installed, so select your board carefully according to your printing needs.
The HL-730Plus series printer has 1.0 MB of memory as standard. The
memory capacity can be expanded up to 2 MB with an optional memory
board. Only one size of memory boards is available as an option, giving
1.0 MB memory expasion.
1.0 MB
HL-720 series N/A
HL-730 series MB-110
HL-730Plus series MB-110
These memory options may be purchased directly from Brother or from
an authorized Brother dealer/retailer.
The memory board is installed onto the main controller board inside the
printer. For the installation details, please see the Instruction guide which
is provided with the memory board.
1.5 MB
MB-215W
MB-115
N/A