34
WATCHING TV
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
NOTE
y
You can also change the image size by
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menu.
y
The available ratio varies depending on the
input source.
-
16:9: Resizes images to fit the screen width.
-
Just Scan: Displays video images in the original
size without disappearing parts at the edge of
the image.
NOTE
y
If you select Just Scan, you may see
image noises at the edge of the original
signal.
y
The input sources: DTV, Cable
TV,Component, HDMI-DTV, and DVI-DTV
(720p/1080i/1080p) support Just Scan.
-
Set By Program: Displays images in the same
aspect ratio with the original image.
-
4:3: Resizes images at the standard 4:3
without distortion.
-
Zoom: Enlarges an image to fit the screen
width. The top and bottom of the image may
not appear.
NOTE
If you access, Aspect Ratio in the Quick
menus,
y
Press < or > to stretch an image
vertically.
y
Press ^ or v to move the zoom focus up
or down.
-
Cinema Zoom: Enlarges an image in the
cinemascope ratio, 2.35:1.
y
To change the ratio of the cinema zoom,
press < or > and its range is from 1 to 16.
y
To move the zoom focus up or down,
press ^ or v.
NOTE
If you enlarge or reduce an image, the
image may be distorted.