Advertisement
3
Press the
power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the
4
Use the arrow buttons on the remote control to highlight any options on
the Home screen that appears, then press
between projection sources and quickly access various adjustment options
from this screen.
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
Select your language and press
menu system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the tips in "Troubleshooting" on the back of this sheet.
2
To adjust the image height, rotate the front or rear feet to raise or lower
them.
3
To reduce or enlarge the image, press the T (reduce) or W (enlarge)
button on the projector.
4
If you need to focus the image, first slide the switch on the side of the
projector to open the air filter cover. Then raise or lower the focus lever
to sharpen the image.
power button twice.
to select it. You can switch
. Select Language and press
.
. Press the Menu button to exit the
5
If your image is uneven on the sides, you can use the keystone correction
feature to adjust the image. To use this feature, press the
button to display the keystone correction screen. Then press the W or T
button to correct for horizontal keystone distortion and the
button to correct for vertical keystone distortion. See the online User's
Guide for details.
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online
User's Guide.
or
or
Choose which source
to display
Navigate projector
menus
Access the Home
screen
Advertisement
