Rf Safety Information; Radio Frequency Energy; Specific Absorption Rate (Sar) - Zte MF730M Quick Start Manual

Hide thumbs Also See for MF730M:

RF SAFETY INFORMATION

 The wireless device has an internal antenna. For optimum performance with minimum power

consumption do not shield the device or cover with any object.

 Covering the antenna affects signal quality and may cause the device to operate at a higher power

level than needed.

 The wireless device is a low-power radio transmitter and receiver.

When switched on it intermittently transmits radio frequency (RF) energy (radio waves).

 The transmit power level is optimized for best performance and automatically reduces when there is

good quality reception.

 Maximum power is only used at the edge of network coverage so under most circumstances the

power output is very low.

 Under poor network conditions the device transmits at a higher power level and may get hot.

 The wireless device is designed to be used in close proximity to the body. We declare that the product

detailed in this manual, and in combination with our accessories, conforms with the essential

requirements of the New Zealand Standard (NZS2772) when used at a distance of not less than 10mm

from the body.

 The worst case SAR result is published on http://zte.co.nz

Z1196

Table of Contents