Acer Altos G330 Series User Manual page 57

12 Reinstall the HSF assembly.
The HSF type will depend on the new processor model. The
figures below show the HSF types available for the Altos G330
system.
(1) Align then insert the HSF on top of the retention plate.
(2) Tighten the four mounting pins a few threads in, observing a
diagonally opposite pattern, then tighten them completely to
secure the heat sink to the processor base.
(3) Reconnect the HSF cable to its mainboard connector.
13 Observe the post-installation instructions described on page 26.
39