Show Spanning-Tree Interface-Security; Show Spanning-Tree Mst - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide

30.25 show spanning-tree interface-security

Description
The show spanning-tree interface-security command is used to display the
protect information of all ports or a specified port.
Syntax
show spanning-tree interface-security [fastEthernet
port
tc-defend]
Parameter
port
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the protect information of all ports:
T3700G-52TQ(config)#show spanning-tree interface-security
Display the protect information of Gigabit Ethernet port 1/0/1:
T3700G-52TQ(config)#show spanning-tree interface-security
gigabitEthernet 1/0/1
Display the interface security bpdufilter information:
T3700G-52TQ(config)# show spanning-tree interface-security bpdufilter

30.26 show spanning-tree mst

Description
The show spanning-tree mst command is used to display the related
information of MST Instance.
Syntax
show spanning-tree mst {configuration [digest] | instance
[interface [fastEthernet
port
Parameter
instance-id
| ten-gigabitEthernet
—— The Ethernet port number.
] ] }
—— Instance ID desired to show, ranging from 1 to 8.
port
] [bpdufilter | bpduguard | loop | root | tc |
port
| gigabitEthernet
248
port
| gigabitEthernet
instance-id
port
| ten-gigabitEthernet