How To Charge - Motorola HS830 Start Here Manual

How to Charge

Action
1 Remove the wireless
module from the
clothing clip. Plug the
Motorola charger into
the module, with the
charger's release tab
facing down and the
module facing up.
2 Plug the other end of the charger into an electrical
outlet.
During charging, the LED indicator turns on and
remains on until charging completes. The wireless
module will not work while charging. The battery fully
charges in approximately two hours.
3 When charging completes (indicator off), remove the
charger from the electrical outlet, press the release
tab, and detach the charger from the module.
4 To turn on your wireless module, press and hold the
MFB for 3 seconds until the LED flashes rapidly. To
turn off your wireless module, press and hold the
MFB for 3 seconds until the LED flashes rapidly
and turns off.
Note: You can also use a Motorola Original Vehicle Power
Adapter to charge the wireless module battery while in your
vehicle.
Charger
Plug
Wireless
Module
9