Toyota Highlander Hybrid 2017 Owner's Manual page 226

226
4-2. Driving procedures
Stopping the hybrid system
Stop the vehicle completely.
1
Set the parking brake (→P. 240), and shift the shift lever to P.
2
Press the power switch.
3
Release the brake pedal and check that "ACCESSORY" or
4
"IGNITION ON" on the multi-information display is off.
Changing power switch modes
Modes can be changed by pressing the power switch with brake pedal
released. (The mode changes each time the switch is pressed.)
*
Off
1
The emergency flashers can be
used.
ACCESSORY mode
2
Some electrical components such
as the power outlet can be used.
"ACCESSORY" will be displayed
on the multi-information display.
ON mode
3
All electrical components can be
used.
"IGNITION ON" will be displayed on the multi-information display.
*
: If the shift lever is in a position other than P when turning off the hybrid sys-
tem, the power switch will be turned to ACCESSORY mode, not to off.
HIGHLANDER_HV_U (OM48F12U)