Korg LP-380 Owner's Manual page 15

Enabling/disabling program change transmis-
sion/reception filtering
The programs on a connected MIDI device can be changed
by sending a MIDI change number from the LP-380. In
addition, the programs on the LP-380 can be changed by
receiving a MIDI change number from a connected MIDI
device.
For program change numbers and their corresponding
sounds, refer to "Table of sounds and corresponding pro-
gram change numbers" below.
To transmit/receive program change messages, disable this
function (oFF: default setting). To not transmit/receive the
messages, enable this function (on).
• Enter the MIDI function mode, and then press the
E.PIANO1 button.
The E.PIANO1 sound button lights up, and the setting
(oFF) appears in the display.
Transmitting program changes
When a sound is selected using the sound buttons and
BANK button on the LP-380, the corresponding MIDI pro-
gram change number is transmitted.
Receiving program changes
When the LP-380 receives a MIDI program change num-
ber, the sound is changed to the corresponding number.
If an incompatible program change number is re-
ceived, the LP-380 sound is not changed.
Table of sounds and corresponding program change
numbers
CC0: Bank Select (MSB) for all sounds is set to 121.
Sound Button Bank CC32
PIANO1 1 1
2 0
3 0
PIANO2 1 2
2 0
3 0
E.PIANO1 1 0
2 1
3 3
E.PIANO2 1 0
2 2
3 1
HARPSI/CLAV 1 0
2 0
3 1
VIBES/ 1 0
GUITAR
2 0
3 0
ORGAN1 1 0
2 1
3 0
ORGAN2 1 0
2 1
3 2
STRINGS 1 0
2 0
3 1
CHOIR 1 0
2 1
3 2
PC Sound
Classic Piano
0
Grand Piano
0
Jazz Piano
1
Live Piano
0
Honky-Tonk
3
Elec.Grand
2
Club E.piano
4
Vintage E.Piano
4
Tremoro EP
4
Dig.E.Piano1
5
60's E.Piano
4
Dig.E.Piano2
5
Harpsichord
6
Clav
7
Synth Clav
7
Vibraphone
11
Marimba
12
Acoustic Guitar
24
Jazz Organ1
16
Jazz Organ2
16
Jazz Organ3
17
Pipe Organ1
19
Pipe Organ2
19
Positive Organ
19
Strings
48
Cinema Strings
50
Analog Strings
50
Aah Choir
52
Ooh Voices
52
Classical Choir
52
Enabling/disabling control change transmission/
reception filtering
Messages, such as usage of the LP-380's damper pedal, can
be transmitted to a connected external MIDI device to con-
trol it, and these messages can be received from the exter-
nal MIDI device to control the LP-380.
To transmit/receive control change messages, disable this
function (oFF: default setting). To not transmit/receive the
messages, enable this function (on).
• Enter the MIDI function mode, and then press the
E.PIANO2 button.
The E.PIANO2 sound button lights up, and the setting
(oFF) appears in the display.
Using the LP-380 as a multi-timbral sound module
The LP-380 can operate as a 16-part multi-timbral sound
module when an external MIDI device is used to control
its internal sound generator.
1. Connect a MIDI cable to the LP-380's MIDI IN con-
nector and to the MIDI OUT connector of a sequencer
or other MIDI device.
2. Transmit MIDI data from the connected sequencer or
other MIDI device.
For details on transmitting data from the connected
sequencer or other MIDI device, refer to its user's man-
ual.
3. When the LP-380 receives the program change message
along with the performance data, it will play with the
sound corresponding to that program number.
If the LP-380 is not to be used as a multi-timbral sound
module, disable this function (oFF).
• Enter the MIDI function mode, and then press the
HARPSI/CLAV button.
The HARPSI/CLAV sound button lights up, and the
setting (on: default setting) appears in the display.
15