Summary of Contents for Harbor Freight Tools CEN-TECH 94767
Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Specifications s t l , º , º , º º 0 : y l ± " 1 º 0 ½ ) " º 0 This gauge can be used to measure undercut, excess material, fillets, preparation angle and misalignment of weld joints. The digital readout is easy to read. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram.
Page 3
Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 13. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
Battery Installation To install battery, slide the battery compartment door open as shown in the photo. Install one 1.5 volt button battery with positive polarity toward the battery compartment door, as shown in the photo. NOTE: The positive end is marked with a + sign.
Page 5
Using the Digital Welding Gauge Measuring Undercut Undercuts are grooves which form at one or both sides of a weld joint. They are usually caused by moving the welding rod too quickly, or too high current being used during welding. Undercut is considered a welding defect. It is difficult to measure undercut because of the small size of the defect.
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.