Dodge Charger Police 2018 Owner's Manual Supplement page 36

34 STARTING AND OPERATING
Secure Park Button (Back View Of Steering Wheel)
The instrument cluster will display a message indicating
when the system is Active or Off.
NOTE: The normal radio functionality for the left-rear and
right-rear center buttons (Preset advance and Audio Mode
advance) are deactivated.
System Activated
The system is activated as soon as the transmission is
shifted into Park (when Secure Park has been previously
enabled). If the brake is pressed after activation, a message
will be displayed that states the Secure Park is activated.
Press the Secure Park button to disable.
To Deactivate
When you press the Secure Park button, the vehicle will
search for a valid key fob. If a valid fob is present, the
system will be deactivated and disabled. The vehicle can
then be shifted out of Park.
NOTE: If a valid fob is not found, a message will indicate
that the fob was not found.
Transmission Limp Home Mode
Transmission function is monitored electronically for ab-
normal conditions. If a condition is detected that could
result in transmission damage, Transmission Limp Home
Mode is activated. In this mode, the transmission remains
in the current gear until the vehicle is brought to a stop.
After the vehicle has stopped, the transmission will remain
in second gear regardless of which forward gear is selected.
PARK, REVERSE, and NEUTRAL will continue to operate.
The Malfunction Indicator Light (MIL) may be illuminated.
Limp Home Mode allows the vehicle to be driven to an
authorized dealer for service without damaging the trans-
mission.
In the event of a momentary problem, the transmission can
be reset to regain all forward gears by performing the
following steps: