Rear Tail, Stop, And Turn Signal Lamps - Jeep Grand Cherokee 2016 Owner's Manual

Rear Tail, Stop, and Turn Signal Lamps

1. Raise the liftgate.
2. Remove the two push-pins from the tail lamp housing.
3. Grasp the tail lamp and pull firmly rearward to
disengage the lamp from the aperture panel.
Tail Lamp Push Pins
MAINTAINING YOUR VEHICLE 713
4. Twist socket counter clockwise and remove from
lamp.
Rear Of Tail Lamp
1 — Rear Stop Lamp Bulb Socket
2 — LED Tail Connector – Do Not Remove
3 — Rear Turn Signal Bulb Socket
7