Hearing Aid - Nokia 6265i Manual

S e t t i n g s
Loopset
A LPS-4 Loopset accessory allows your device to optimize sound quality when
coupled with a hearing aid that is set to T-coil mode.
In the standby mode, select Menu
Loopset > Yes or No.
If the Loopset is connected and recognized through the Pop-Port™ connector, the
phone automatically uses the Loopset.
TTY/TDD
Check with the manufacturer of the TTY/TDD device for a connecting cable that is
compatible with the Nokia 6265 or Nokia 6265i.
TTY/TDD communications depend on network availability. Check with your
service provider for availability and description of services.
In the standby mode, select Menu
TTY > Yes or No.
Charger
In the standby mode, select Menu
one of the following:
Default profile—Select the profile you want to automatically activate when your
phone is connected to the charger.
Lights— Select On or Automatic
automatically after several seconds.

Hearing aid

You can configure your device to optimize sound quality when coupled with a
hearing aid that is set to T-coil mode.
In the standby mode, select Menu
T-coil hearing aid mode > On or Off.
Only activate the T-coil hearing aid mode
aid or it may impact the audio performance of the device.
94
FCC DRAFT ONLY
> Settings > Enhancements >
> Settings > Enhancements >
> Settings > Enhancements >
to keep the phone lights always on or to shut off
> Settings > Enhancements >
when using your device with a hearing
Loopset > Use
TTY/TDD > Use
Charger and
Hearing aid >