Setting An Indoor Unit Installation Option - Samsung AF55JV1MAEE Service Manual

Troubleshooting

4-3-17 Setting an indoor unit installation option

Setting an indoor unit installation option(suitable for the condition of each installation location)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Set the installation option according to the installation condition of an air conditioner.
- The default setting of an indoor unit installation option is 02000-100000-200000-300000.
4. Set the indoor unit option by wireless remote controller.
SEG1
0
SEG7
1
SEG13
2 External control
SEG19
3
▶ Heating setting compensation (SEG21) is applied to Heat pump model only.
4-24
SEG2 SEG3
2 RESERVED
SEG8 SEG9
RESERVED RESERVED
SEG14 SEG15
External control
output
SEG20 SEG21
Heating setting
RESERVED
compensation
SEG4 SEG5
RESERVED RESERVED
SEG10 SEG11
RESERVED RESERVED
SEG16 SEG17
RESERVED RESERVED
SEG6
RESERVED
SEG12
RESERVED
SEG18
RESERVED
Samsung Electronics