Additional Storage Center Information; Fibre Channel Zoning Information - Dell SCv2080 Getting Started Manual

(4-port I/O card only) IPv4 address for storage controller
module 2: port 4

Additional Storage Center Information

The Network Time Protocol (NTP) and Simple Mail Transfer Protocol (SMTP) server
information is optional. The proxy server information is also optional, but it may be
required to complete the Discover and Configure Uninitialized SCv2000 Series
Storage Centers wizard.
Table 5. NTP, SMTP, and Proxy Servers
NTP server IPv4 address
SMTP server IPv4 address
Backup SMTP server IPv4
address
SMTP server login ID
SMTP server password
Proxy server IPv4 address

Fibre Channel Zoning Information

For a storage system with Fibre Channel front-end ports, record the physical and
virtual WWNs of the Fibre Channel ports in Fault Domain 1 and Fault Domain 2. This
information is displayed on the Review Front-End page of the Discover and
Configure Uninitialized SCv2000 Series Storage Centers wizard. Use this
information to configure zoning on each Fibre Channel switch.
See the Dell Storage Center SCv2080 Storage System Deployment Guide for
information about setting up Fibre Channel zoning.
Table 6. Physical WWNs in Fault Domain 1
Physical WWN of storage controller 1: port 1
Physical WWN of storage controller 2: port 1
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
________________
________________
___ . ___ . ___ . ___
___ . ___ . ___ . ___
________________
________________
7