Using Your Tablet - Einstein +2 Quick Start Manual

Using your tablet

Turn on your einstein Tablet+2:
1
™
• To turn on your tablet press the Power button down until
the einstein
logo appears on the screen, then release
™
• Swipe the lock icon to start accessing your tablet's apps
Start experimenting
2
Turning off the tablet:
3
Press and hold down the Power button.
Confirm that you want to power off.
Power Button
4
Charging the battery:
Plug the AC adapter into a wall socket.
Plug one end of the Micro-USB to USB cable into the AC
adapter and the other into the Micro-USB port on the tablet.
The Charge Indicator light will turn red
is low and green when the tablet is fully charged.
Note: An on-screen indicator will give you an accurate indication of battery power.
Note: The tablet may become warm when connected to the charger.
Warning: Using an unauthorized charger may damage the tablet.
Using the sensors
The Light and UV sensors are located at the top of the tablet.
To take a reading aim the sensor at the light source you
want to measure. The Temperature, Humidity and Barometric
Pressure sensors are located at the top of the tablet.
when battery power