Advertisement
9) The update process is successful as the progress bar is 100%. After the update process is ok,
turn off power and wait indicator light is off. Turn on power and TV can work.
Checking
It is needed to check the version o f the firmware for M T 8205A E which has been
download into the Plasma T V .
Press Menu button of the remote control for a little long time and the O SD menu
for Factory Setting is appeared on the screen .
Use the remote control and select the mode of the Factory Setting then enter the
mode of the Factory Setting .
Use the remote control and select the mode of Firmware Version and then enter the
mode of Firmware Version . It is easy to be found the version of the current firmware
for M T 8205A E is as the following : "Firmware Version : V X X "
Process of update MT5351AG
Preparing :
1) Connect RS232-VGA download line, One connector is connected to VGA connect port of
Plasma TV while another side is connected to PC COM port.
2) Store the MtkTool into the PC
Downloading :
3) Turn on AC power switch of the Plasma TV and then press the button "standby" of the remote
control . The image could be found on the screen of the Plasma TV while the color of the
power indicator is green . (the mode of the Plasma TV will be standby mode if after turn on
the main power switch only . )
4) Execute MTKtool and select the chipset as MT5351AG (the software of MTKtool will be sent
to your side)
Advertisement
