Table of Contents
Advertisement
Top Case of HH1620
The following illustration shows the HH1620 front panel:
The LEDs of the router indicate its operational status.
LED Description
LED
Power
Indicates the unit is powered on.
Status/Alarm
The Status LED will flash when performing a self-test/booting up or is
registering with the service provider. The Status LED will flash green slowly
when the system is connected with the service. The Alarm LED will light solid
red if the self-test or boot up fails. The Alarm LED will flash red slowly when
the system is ready but cannot receive an acknowledgement from the
service.
Prov
This LED flashes when the device has established a connection and
received authorization from your service provider.
WAN
When a connection is established the 10 or 100 LED will light up solid. The
LED will blink to indicate activity. If the 10 or 100 LED does not light up when
a cable is connected, verify the cable connection and make sure your device
is powered on.
LAN1-3
When a connection is established the 10 or 100 LED will light up solid on the
appropriate port. The LEDs will blink to indicate activity. If the 10 or 100 LED
does not light up when a cable is connected, verify the cable connections
and make sure your devices are powered on.
Phone1-2
This LED displays the VoIP status and Hook/Ringing activity on the phone
port that is used to connect to your normal telephone(s)/fax machine and
regular telephone line. If a phone connected to a phone port is off the hook
or in use, this LED will light solid. When a phone is ringing, the indicator will
blink.
ADSL
When a DSL connection is established, this LED will light up solid. The LED
will blink to indicate activity. If it does not light up when a DSL cable (RJ-11
line) is connected, verify the cable connection and make sure your device is
powered on.
HH1620 Wireless VoIP Gateway
User's Guide
Description
13
Overview
Advertisement
Table of Contents
