LG SA560 Owner's Manual page 8

Safety Precautions
8
Cleaning
WARNING
y
Do not spray the projector with
water when cleaning. Make sure water
does not flow into the projector.
- This may result in fire or electric
shock.
y
Use air spray, a soft cloth or
a cotton swab moistened with a
lens cleaning chemical or alcohol to
remove dust or stains on the front
projection lens.
CAUTION
y
Contact your seller or our service
center once a year to clean the inter-
nal parts of the projector.
- If you do not clean the projector for
a long period of time, dust will
accumulate, which may result in fire
or damage to the projector.
y
When cleaning plastic parts such as
the projector case, unplug the power
first and wipe with a soft cloth. Do not
spray with water or wipe with a wet
cloth. Never use glass cleaner, auto-
mobile or industrial shiner, abrasives,
ZD[ EHQ]HQH RU DOFRKRO DV WKHVH
can damage the projector.
- This can result in fire, electric
shock or cause damage to the product
(deformation and corrosion).
y
Remove the plug from the outlet before
cleaning the product.
- Otherwise, this may result in electric
shock.
Others
WARNING
y
When you go out, place the projector
out of reach of animals, and remove
the power plug from the wall outlet.
- Using a damaged power cord may
result in short circuit or fire.
y
Do not use the projector near
high-precision electronic devices
or those that transmit weak radio
signal.
- This may affect the operation of the
product, causing an accident.
y
Only a qualified technician can
disassemble or modify the projector.
For diagnosis, adjustment, or repair,
contact your seller or our service
center.
- This may result in fire or electric
shock.