2. Getting Started
2.1
Baby Unit Power Supply
1.
Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable mains power socket.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA).
2.
Slide the POWER ON/OFF switch to the ON position. The power LED will
light up in red.
3.
Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2
Parent Unit Power Supply
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-ion
battery 1880mAh), please charge it for 16 hours before initial use. The battery is not
a user-accessible item. Please contact the helpline if you think it needs replacing.
10
Getting Started