Back; Setting Up Your Speaker - Insignia NS-CSPGASP-B User Manual

Back

Microphone on/off
Power status light
FEATURE
Power Input
Microphone
on/off/Factory reset
USB charge out
Proximity

Setting up your speaker

To set up your speaker, you will need your speaker, its power adapter, and a phone or tablet.
1 Place your speaker in a convenient location.
2 Plug one end of the power adapter into a power outlet, then plug the other end into your speaker. Your speaker
powers on.
3 Make sure that your Wi-Fi, Location Services (GPS), and Bluetooth are turned on/enabled on your device.
4 Make sure that the clock on your device is set to the correct time.
5 Download and run the Google Home app on a phone or tablet to set up your speaker.
6 To use Google Assistant, you must sign in to your Google Account.
For more help, visit g.co/home/setup.
Factory reset
USB charge out
5V/1A
Power Input
12V/2.5A
DESCRIPTION
Plug in to turn your speaker on. The white LED on the back of your
speaker blinks slowly, then turns on.
• Short press to turn microphone on or off. The orange LEDs on the
top of your speaker light solid when the microphone is muted.
• Press for 12 seconds to reset the product.
Connect to your device to supply 5V/1A charging.
• Quick hand wave (less than 1 second): Illuminates your buttons
and lowers the volume/snoozes your alarm
• Hold hand over: Lowers brightness of all buttons
• Touch button: Raises button to full brightness
www.insigniaproducts.com
Insignia Voice™ Speaker
6