Siemens SL75 Manual page 77

of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:39)
right page (77)
Lists options
Different functions are offered
depending on the list.
§Options§
Search/Retry
Use as audio
Higher priority
Lower priority
to reject list
to known list
(For standard functions see page 22)
My BT name
The phone is given a name (max.
20 characters) – this is the name the
partner sees. If no name is given,
the phone uses the non-changeable
device address.
Information about the BT hardware
also cannot be modified.
Open menu.
Search for BT devices or
repeat search.
If not possible automati-
cally, specify device as
an "audio" device.
Move entry up the list so
that, for example, a spe-
cific audio device is used
first.
Move entry down the list.
Move entry to the reject
list.
Move entry to the list of
known devices.
Visib.to others
Make settings to specify how your
phone should "act" when in contact
with other BT devices. This means (if
"visible"), for example, that the de-
vice address or the BT name of your
phone is shown to other BT devices if
they request this in order to receive
or send data.
• Not visible
Your phone is not "visible" to other
BT devices. Known devices such as
the Bluetooth Headset / Car Kit con-
tinue operating.
• Auto mode
Your phone is "visible" to other BT
devices for five minutes. You will
then be asked if "visibility" should
continue.
• Always visible
Your phone is always "visible" to oth-
er BT devices. These devices can cre-
ate a connection to your phone and
be added to the known device list if
necessary.
BT aud. stream
When a Bluetooth headset is used,
all audio signals are transmitted to
this exclusively.
Settings 77