Advertisement
Quick Links
2 player WIRELESS PORT
WIRED PLAYSTATION CONTROLLERS
Congratulations! You have purchased the most advanced RF Wireless video game
controller extension ever made. The Wireless Port eliminates hazardous cords across
the room by allowing you to access the PlayStation controller ports next to you. The
Wireless Port was designed by a group of PhD's in RF technology that has developed
specialized RF communications for NASA. The Wireless Port will transmit two
standard wired controller signals to the PlayStation console utilizing Radio Frequency
technology and will support all the features of the original Sony controller, with
wireless game play up to 50 feet. Please read the following operation instructions
before using the Wireless Port.
PRODUCT FEATURES
•
Full PS2 Analog pressure sensitive compatible
•
SMART CHANNEL automatically finds the optimal RF channel for each Wireless Port.
•
Advanced embedded antenna
•
Power On button, powers on game play
•
Auto power off when no data transmission for 5 minutes
•
Manual power off button (hold Vibration Motor On/Off button for more than 2 seconds,
power is turned off)
•
Vibration On/Off switch, allows you to manually turn controller motors off to conserve
battery power.
•
Low battery indicator, Power Indication LED will blink;
•
Reach your save point. Automatically turns off vibration motors when battery is low to
conserve power.
•
Low battery shut down when operation is unreliable, the Wireless Port pauses game
play and shuts off the system entirely until batteries replaced.
Advanced Technologies
TM
RF REMOTE EXTENSION FOR
Advertisement
Summary of Contents for Sylvania Wireless Port
- Page 1 PlayStation controller ports next to you. The Wireless Port was designed by a group of PhD’s in RF technology that has developed specialized RF communications for NASA. The Wireless Port will transmit two...
- Page 2 • Connecting the Receiver: The Wireless Port includes a Receiver device that must connect to both 1 and 2 player controller ports on the PlayStation for the Wireless Port to function. Wireless Port has two cables with player 1 and 2 markings.
- Page 3 Wireless Port to the receiver when powered on. For Best Performance: • Use the Wireless Port and Receiver within 50 feet of each other. The effective range may vary depending on outside interference from radio frequency sources.
- Page 4 • Do not mix different brands of batteries. • Do not leave dead batteries in the Wireless Port. When the batteries are losing their charge, the Power Indicator will Flash and become Dim. When this happens, promptly replace all used batteries with fresh new batteries.