Viewing Inbox Text Messages; Writing/Sending Text Message; Sending A Quick Text Message - RCA BR200DV Instruction Manual

BR200D TM
indicated with an exclamation mark. (!)
Writing and Sending Text Message
1. Press [O] to access the menu.
2. Press [<] or [>] to navigate to Messages and
press [O] to select.
3. Press [<] or [>] to navigate to Write and
press [O] to select.
4. A blinking cursor appears, use the keypad
to type your message. Press [<] to move
one space to the left. Press [>] or [#] to
move one space to the right. Press [*] to
delete unwanted characters.
5. Press [O] once message is composed.
6. Press [<] or [>] to go to the required alias
or ID and press [O] to select the name. OR
press [<] or [>] to access Manual Dial and
press [O]. Input subscriber ID and press [O]
to confirm.
7. The radio display shows Text Message:
<Subscriber/Group Alias or ID>, which
confirms your message is being sent.
/ BR300D TM Professional Digital Two-Way Radio Instruction Manual
Copyright © 2015 RCA Communications Systems
8. If the message is sent, a tone sounds and the
display shows Message Sent. If the message
is not sent, a low tone sounds and the
display shows Message Send Failed. If the
text message fails to send, the radio returns
you to the Resend option screen.

Sending a Quick Text Message

Your radio stores a maximum of 10 Quick
Text messages as programmed by your RCA
Communications Systems dealer. While Quick
Text messages are predefined, you can edit each
message before sending it.
1. Press [O] to access the menu.
2. Press [<] or [>] to navigate to Messages.
3. Press [<] or [>] to Quick Text and press [O].
4. Press [<] or [>] to find the desired Quick Text
and press [O] to select.
5. A blinking cursor appears. Use the keypad
to edit the message, if needed. Press [<]
to move one space to the left. Press
[>] or [#] to move one space to the right.
35