Overview - Beeps; Beeps - Keys, Battery, Range; Select Services - Siemens 2000C pocket Operating Instructions Manual

Settings
Overview – beeps
Beep type Explanation, note
Key Beeps Audible each time a key is
pressed .
Batt. Low Beep Audible approx. 5 minutes before
the battery runs out.
Range Warning Audible when you leave the radio
range.
Confirm Beep Audible if a local function/set-
ting was successfully per-
formed .
Error Beep Audible if a function/setting was
not successfully performed.
Also in the case of erroneous/
unauthorised entries.
In range Beep The in range beep is audible if the
mobile unit is reconnected to a
base station (resynchronised
with base).
See page 59 for information on acoustic signals.
49
Settings


Beeps – keys, battery, range...

Default
On



On
1 

Off

On


On
 
  
  
  
 
Off

  


Example: activating/deactivating the range warning
 6

  8 


OK

or
''

Press the menu key.
  
Scroll to
and confirm.
0   
Scroll to
and confirm.

 
Confirm .
For an explanation of the individual
beeps, see "Overview – Beeps", page
49.
  8 
Scroll to
and confirm.
Type of beep
Range warning symbol
Confirm current setting
 ''
or is displayed
depending on the current setting
Press the relevant display key.
Confirm the setting (save).
50
Settings

Select services

The stored default select services (operating sequences
for Telecom services) cannot be used with cordless EM.



Saving functions under
Frequently used functions (operating sequences) that are
started when the mobile is in the "on" status can be stored



"under" the display key. This will simplify operations.
Example: Call forwarding to a specific user, in accordance
with "Overview - code functions" on page 27.




Press the display key.
Press the display key.
The remaining operating steps are performed in a similar
way to those described under "Saving a short cut – new
entry", see page 40.
Starting saved functions




Press the display key.


Scroll to the desired function.
Press the display key

  
Confirm .

Deleting default select services
The default select services are already loaded when the unit
is delivered*.
In order to make more space (approx. 10%) for the tele-
phone directory/short cuts, you can delete the default select
services.






Press the display key.
Press the display key.
$%  !
Scroll to
%  - #
and confirm.

* Not loaded with international mobile unit variants.
51