Table of Contents
Advertisement
Settings menu
AutoOpen
At the end of programmes with a drying
phase the door will open automatically
a little in order to help the drying
process (see "Programme chart").
In the
programme the door will
ECO
open automatically during the drying
phase. In the
QuickPowerWash
programme it will open
a few minutes after the programme has
finished.
This function can be deactivated if
wished.
Select the setting you want and
confirm with
OK
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Knock2open
You can choose whether the door
should open with 1 or 2 knocks.
Select the setting you want and
confirm with OK.
This function can also be disabled, in
which case the door has to be fitted
with a handle to open it.
110
.
Optimise standby
The dishwasher is supplied with the
Optimise standby
function switched on as
standard.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a sensor has been
pressed or after the end of a
programme.
The dishwasher will not switch off in
the event of a fault.
Optimise standby can be switched off if
you prefer. If you do this, the duration
before the dishwasher switches off
increases to 6 hours. Doing this will
increase energy consumption.
Select the setting you want and
confirm with OK.
BrilliantLight
This dishwasher has interior lighting.
When the door is open, the lighting will
switch off automatically after 15
minutes.
The interior lighting can be switched off
permanently.
Select the setting you want and
confirm with
OK
.
Hide quick links:
Advertisement
Table of Contents
