Selecting The Sound Effect - Sony DAV-TZ130 Operating Instructions Manual

To play repeatedly/shuffle, etc.
Press REPEAT repeatedly to select the
desired playback mode. The selected mode
appears in the front panel display.
 "REP CHP": Repeats the current chapter.
 "REP TT": Repeats the current title.
 "REP ALL": Repeats all titles.
 "REP TRA": Repeats the current track.
 "REP OFF": The system returns to normal
playback mode.
 "SHUFFLE": Plays the contents once in
random order until all the contents have
been played.
 "SHUF REP": Repeats shuffle play.
 "FOLDER": Plays the current folder.
 "RANDOM": Plays all files in random
order.
 "SINGLE": Plays the current file.
 "REP ONE": Repeats the current file.
 "REP FLD": Repeats the current folder.
Note
 The selectable modes and their order differ
depending on the disc or file.

Selecting the Sound Effect

To select an equalizer setting
Press EQ repeatedly during playback until
the desired mode appears on the front panel
display.
 "FLAT": Flat and pure sound mode.
 "CLASSIC": Ideal for listening to classical
music and watching live concert DVDs.
 "JAZZ": Clear mid and high range.
Recreates the atmosphere of a live club with
the artist just in front of you. Good for jazz
music and watching dramas.
 "ROCK": Enhanced low and high range for
great sounding movie effects and
atmosphere. Great for action movies and
rock/pop music.
To select a surround setting
Press SURROUND repeatedly during
playback to select a surround audio output
mode. The selected mode appears in the
front panel display.
 "MULTI" (A.F.D. MULTI): When the
source is 2 channel, sound is output from
all speakers.
 "STANDARD" (A.F.D. STANDARD): The
system discriminates the sound format of
the source and presents sound as it was
recorded/encoded.
 "DOLBY PL"(PRO LOGIC): Performs
Dolby Pro Logic decoding.
 "2CH ST" (2CH STEREO): All formats are
downmixed to 2 channels.
Note
 Depending on the playback stream, the
surround settings may not be effective.
19
Using a Tuner
To preset radio stations
You can preset 20 FM stations. You can then
tune in any of those stations simply by
selecting the corresponding preset number.
1
Press FM.
2
Press and hold TUNING +/– for 2
seconds to start tuning until you find
the desired radio station.
"SEARCH +" or "SEARCH –" appears in
the front panel display until a radio
station with sufficient signal strength is
found.
3
Press and hold SHIFT, then press
PROGRAM.
"P 01" flashes in the front panel display.
4
Press and hold SHIFT, then press the
number buttons to select a preset
number.
5
Press to store the station
frequency.
To select a preset radio station
1
Press FM.
2
Press PRESET +/- to select a preset
number.
You can also select a preset number by
pressing and holding SHIFT, then
pressing the number buttons.
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
Press AUDIO.
"STEREO": Stereo reception.
"MONO": Monaural reception.
20