Lenticular Screen And Fresnel Lens Disassembly - Mitsubishi Electric WD-73640 Technical Training Manual

SCREEN REPLACEMENT 82" & 92" Models (continued)

Lenticular Screen and Fresnel Lens Disassembly

1. Remove the HOLDER-SCREEN from the top, bottom and sides.
2. Separate the Lenticular Screen and Fresnel Lens.
HOLDER-SCREEN
LENTICULAR
SCREEN
HOLDER-SCREEN
(TOP/BOTTOM)(SIDES)
Lenticular Screen and Fresnel Lens Replacement
1. Place the Fresnel Lens on top of the Lenticular Screen with the labels facing outside as shown.
2. Install the HOLDER-SCREEN, top, bottom and sides as shown above.
3. Reverse the disassembly procedure to reassemble and install the screen frame assembly.
NOTE: The Lenticular Screen must face the front and the Fresnel Lens must face the rear.
FRESNEL
LENS
53
DLP HOME CINEMA
®
LENS
LENTICULAR
SCREEN
FRONT
Label Position
(Facing Outside)