Siemens C75 User Manual page 96

left page (96) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
96 Settings
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service pro-
vider in the Internat at this address:
www.siemens.com/
mobilephonescustomercare (page 125).
Make the settings.
I
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be en-
abled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec voice/fax
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
End transmission
End transmission with PC-software
and/or press .
B
Rcve fax/data
Your service provider has given you
a number for telephoning and
a fax/data number.
The call is signalled by a special ring-
ing tone and the type of call (fax or
data) is displayed. Now start the
communication program in your PC
to receive the fax/data.
b
b
b