Fuel Economy - Dodge grand caravan 2011 Owner's Manual

JOBNAME: cims CHRY OM French PAGE: 197 SESS: 4 OUTPUT: Tue Nov 2 10:27:14 2010 SUM: 2C895986
/chry_pdm/chrysler/owners/car/og
Required message will flash in the EVIC
display for approximately 10 seconds, af-
ter a single chime has sounded, to indi-
cate the next scheduled oil change inter-
val. The engine oil change indicator
system is duty-cycle based, which means
the engine oil change interval may fluctu-
ate dependent upon your personal driving
style.
Unless reset, this message will continue to
display each time you turn the ignition
switch to the ON/RUN position. To turn off
the message temporarily, press and re-
lease the Menu button. To reset the oil
change indicator system (after performing
the scheduled maintenance) perform the
following steps.
1. Turn the ignition switch to the ON posi-
tion (do not start the engine).
2. Fully depress the accelerator pedal,
slowly, three times within 10 seconds.
3. Turn the ignition switch to the OFF/
LOCK position.
NOTE: If the indicator message illumi-
nates when you start the engine, the oil
change indicator system did not reset. If
necessary, repeat these steps.

Fuel Economy

Press and release the UP or DOWN button
until "Fuel Economy" displays highlighted
in the EVIC and press the SELECT button.
Press and release the UP/DOWN buttons
until one of the following Fuel Economy
functions displays in the EVIC:
• Average Fuel Economy/Fuel Saver
Mode
• Distance To Empty (DTE)
UNDERSTANDING YOUR INSTRUMENT PANEL
• Miles Per Gallon (MPG)
Press the UP/DOWN buttons to cycle
through all the Trip Computer functions.
The Trip Functions mode displays the fol-
lowing information:
Average Fuel Economy
Shows the average fuel economy since
the last reset. When the fuel economy is
reset, the display will read "RESET" or
show dashes for two seconds. Then, the
history information will be erased, and the
averaging will continue from the last fuel
average reading before the reset.
197