Actual Values; Actual Values Main Menu; A1 Status; Virtual Inputs - GE 750 Instruction Manual

Overview
Actual Values Main
Menu

ACTUAL VALUES

A1 STATUS

ACTUAL VALUES
A2 METERING
GE Multilin
6 Actual Values
Overview
Measured values, maintenance, and fault analysis information are accessed in actual
values mode. Actual value messages are organized into logical groups for easy
reference as shown below. Actual values may be accessed as follows:
1. Front panel, using the keys and display.
2. Front program port, and a portable computer running the EnerVista 750/760
Setup software supplied with the relay.
3. Rear RS485/RS422 COM 1 port or RS485 COM 2 port with a SCADA system
running user-designed software.
4. Ethernet network connection to the rear RJ-45 port and a computer running the
EnerVista 750/760 Setup software supplied with the relay.
[ ]
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
[ ]
MESSAGE
http://www.GEmultilin.com

VIRTUAL INPUTS

[ ]
See page 6–5.
HARDWARE [ ]
See page 6–5.
INPUTS
LAST TRIP DATA [ ]
See page 6–6.
FAULT [ ]
See page 6–6.
LOCATIONS
CLOCK [ ]
See page 6–7.
AUTORECLOSE [ ]
See page 6–7.
END OF PAGE A1
CURRENT [ ]
See page 6–9.
VOLTAGE [ ]
See page 6–10.
750/760
Feeder Management Relay
6–1