Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Neets QueBec Pro
Summary of Contents for Neets QueBec Pro
- Page 1 Manual QueBec Pro Installation Manual...
-
Page 2: Foreword
COPYRIGHT - All information contained in this manual is the intellectual property and copyrighted material of Neets. All rights are reserved. You may not allow any third party access to content, information or data in this manual without Neets’ express written consent. -
Page 3: Important Safety Instructions
Contact your local Neets reseller or distributor. • If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive components inside. -
Page 4: Table Of Contents
PoE power supply to QueBec Pro ........ -
Page 5: Description
Description Neets Control - QueBec Pro is designed to create an intelligent AV-control environment in small and medium-sized meeting rooms or learning spaces with interactive displays or LCDs. QueBec Pro senses the presence of image/picture, and automatically initiates room functions and switches automatically between all HDMI/ VGA signals. -
Page 6: Specifications
Specifications Neets Control - QueBec Pro RS-232 / IR port General Ports 2 x bidirectional Width 218 mm 2 x unidirectional Height 37 mm Baud rate 1200 – 115200 bit/sec Depth 70 mm Data bits 7, 8 Width 8,58 Inches... -
Page 7: Installation
Installation The Neets Control – QueBec Pro is designed to be easily installed in any convenient location. It can be placed on a desk free standing. Simply unpack the unit, mount the adhesive feet and it is ready to go. -
Page 8: Connection And Controls
802.3 and 802.3at, type 1 in order to configure it by USB. config The USB connector for connecting to the QueBec Pro is “mini USB B 5P”. You can buy this cable on the web (select a USB A to Mini USB B 5P). - Page 9 Green Neets Control – QueBec Pro is on and running HDMI normally Flashing red The Neets Control – QueBec Pro is in error mode, se section “Error indication” on page 14 for details Designed in Denmark Page 9 of 14...
-
Page 10: Back
VGA output 2 x bi-directional RS-232 or IR transmitter RJ-45 Network (LAN) connector with PoE input Digital I/O IO Connectors The QueBec Pro has two I/O (Inputs/Outputs), which can be configured as in 1 in 2 in 3 PoE IN output or input. - Page 11 The QueBec Pro has Power over Ethernet functionality built into both the LAN interface connectors. You must connect the QueBec Pro to your LAN if you are using any of the LAN features of the product. The ports features auto MDI-X which means that you can connect the LAN ports directly to other devices without the need for a LAN switch.
-
Page 12: Automaticity Input Selection
Quebec Pro will be selected as the active one. The way QueBec Pro works can be compared to a LIFO (Last in, first out) buffer. The only differ- ence is that if an input no longer is active it will be removed from the “LIFO buffer”. -
Page 13: How To Connect
How to connect PoE power supply to QueBec Pro To power up the QueBec Pro the LAN connector marked with PoE IN should be connected to a compliant PoE power supply or switch (PoE injector not included). Connect the PoE Injector LAN connector marked “POE”... -
Page 14: Troubleshooting
Troubleshooting Error indication using LEDs If there is a fault in either the configuration or the QueBec Pro unit, this will be indicated on the front LED indicators. In all error modes the power LED will flash red alternating with the IO LEDs. The alternating IO...