Marine Installation; Connect Antenna - Uniden CMX660 Owner's Manual

Professional mobile cb radio
Table of Contents

Advertisement

4. Start the vehicle. The unit should turn on.
Turn the vehicle off. The unit should turn off.

MARINE INSTALLATION

Consult your dealer for information regarding
marine installation. It is important to adequately
ground the system and to prevent electrolysis
between the fittings in the hull and the water.

CONNECT ANTENNA

Because the maximum power output of the
transmitter is limited by the FCC, the quality of
your antenna is very important. To achieve the
maximum transmission distance, Uniden strongly
recommends that you install only a high quality
antenna. You have just purchased a superior radio;
don't diminish its performance by installing an
inferior antenna.
Only a properly matched antenna system will
allow maximum power transfer from the 50-ohm
transmission line to the radiating element. Your
Uniden dealer is qualified to help you select the
proper antenna for your requirements. A whip style
antenna may be used for automobile installation.
CAUTION: Never operate your radio with no
antenna or with a damaged antenna cable.
12
This can damage the radio.

Advertisement

Table of Contents
loading

Table of Contents