Ecords To Memory; Umber - RCA TCH5401 User Manual

Caller ID
Transferring CID Records to Memory
You may transfer a Caller ID record to your phone's memory.
NOTE: It is important that you format CID records correctly before storing in memory. It
is not possible to reformat CID records stored in memory.
1. Use the CID/button to scroll to the desired record.
2. Press the STORE softkey.
3. If the CID shows NO NAME, then please enter the name for this record.
4. Press the SAVE softkey.
5. If the CID shows NO NUMBER, then please enter the name for this record.
6. Press the SAVE softkey to enter the VIP Tone Melody selection.
7. Use the VOL (  or 
select softkey to save.
Dialing a Caller ID Number
When reviewing any call record in the Caller ID memory, you can dial back the caller's
number.
1. Make sure the phone is OFF (not in talk mode).
2. Press CID/button once, then VOL (  or ) button until the desired call record is
displayed.
Depending on (a) how the incoming caller's phone number is formatted when
received, and (b) whether or not you pre-programmed your local area code into
memory, you may need to adjust the format of the caller's phone number before
dialing it back.
The FORMAT softkey lets you change the format of the displayed number.
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
NOTE: If the phone company does not supply all ten digits of an incoming caller's
number, you will not be allowed to adjust the format of that number.
Scroll to the number you want to call back:
24
) button to scroll to select the melody ,then press the
Explanation
long distance code "1"
+ 3-digit area code
+ 7-digit telephone
number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
Example
1-317-888-8888
317-888-8888
888-8888