Getting Started; Functional Description; Powering Your Monitor; Operating The System - Samsung BrightVIEW User Manual

G s
ettInG tarted

Functional Description

Powering your monitor

After opening the box, fully charge the monitor before use. After initial charge, recharge
as needed.
Wireless Monitor
You can use the device while charging with connected adapter, and the device is
portable if charged.
Wireless Camera
The Wireless Camera must be plugged in at all times in order to view.
Wireless wrist band
The wireless wrist band must be charging with adapter and the device is portable if
charged.
6 · Getting Started
SEW-3057W.indd 6
negative
positive
negative

Operating the System

The basic operation is as follows:
Camera and Monitor pairing
The units already come paired for your convenience. This button is
used to add an additional camera. User can select camera number
to assign. Up to 4 Cameras may be paired.
Power on wireless monitor and wireless camera.
1.
Touch the live view screen on the monitor, and then the settings icon will appear.
2.
Press the [ ] button on the monitor.
3.
Select [ ] icon.
4.
Select camera number.
5.
The monitor search a camera which sets to pairing mode.
A count down clock appears at the middle of screen which starts counting from
30 to 0.
Press the [PAIR] button on the camera bottom.
6.
Within 30 seconds, if the monitor successfully pairs with the camera, the monitor
7.
will automatically switch to the camera's current view.
Monitor and wrist band pairing
Make sure the monitor should be power.
1.
Touch the view screen on the monitor, and then the setting icon will appear.
2.
Press the [ ] button on the monitor, come into "Menu" interface.
3.
Select [ ] icon, mark sure the Bluetooth should be show [
4.
The monitor will search the Bluetooth device. Choose the Bluetooth and if pairing
5.
success, the monitor will show Paired and the Bluetooth will show " [
in the wrist band.
PAIR
] .
] " icon
2016-12-23 11:48:48