Safety instructions and measures
1.3 Notes on possible property damage
NOTICE
!
Risk of damage to the electric actuator due to the power supply exceeding the per-
missible tolerances.
The Type 5824/5825 Electric Actuators are designed for use according to regulations
for low-voltage installations.
Î Observe the permissible tolerances of the power supply.
Risk of actuator damage due to excessively high tightening torques.
Observe the specified torques on tightening the Type 5824/5825 Electric Actuators.
Excessively tightened torques lead to parts wearing out quicker.
Î Observe the specified tightening torques.
Risk of damage to the electric actuator due to incorrect connection of the voltage.
The electric actuator has terminals to retract the stem (eL terminal) and to extend the
stem (aL terminal).
Î Do not apply a voltage to eL and aL at the same time.
Risk of damage to the electric actuator by turning it too far.
The actuator stem of the electric actuator can be adjusted manually.
Î Only retract the actuator stem as far as the final travel value.
10
EB 5824-1 EN