Fiat 500L 2014 Owner's Manual page 180

178 UNDERSTANDING YOUR INSTRUMENT PANEL
2. Briefly press the MENU button to go back to the menu
screen or press and hold the MENU (approximately
one second) to go back to the main screen without
storing settings.
Speed Beep (Speed Limit)
With this function it is possible to set the car speed limit
(mph or km/h); when this limit is exceeded the driver is
immediately alerted.
To set the speed limit, proceed as follows:
1. Briefly press the MENU button. The display will show
the message (Speed Beep).
2. Press the UP or DOWN
limit activation (On) or deactivation (Off).
3. When the function is activated (On), briefly press the
MENU button to display the presently set activation
button to select speed
speed. Pressing the UP
selects the speed limit. Press MENU to confirm selec-
tion.
NOTE: Selection is possible between 20 and 125 mph
or km/h, depending on the selected unit. The setting will
increase/decrease by five units each time the UP/DOWN
button is pressed. Press and hold the UP/DOWN button
to increase/decrease the setting rapidly. Save the setting
by briefly pressing the button when you approach the
required setting.
• Briefly press the MENU button to go back to the menu
screen, or press and hold the MENU button (approxi-
mately one second) to go back to the main screen
without storing the settings.
To cancel the setting, proceed as follows:
1. Briefly press the MENU button. "On" will flash on the
display.
or DOWN buttons