Table of Contents
Advertisement
LOADING AND STORAGE
||
Rear fitting
1. Fold out the safety net. Make sure that the
safety net's storage pockets are turned
backwards.
2. Hook one of the net's retaining hooks into
the rear roof mounting.
Hook the net's other retaining hook into the
roof mounting on the opposite side.
Take care to press forward the net's retaining
hooks for each respective roof mounting's
front end position.
3. Hook the hook into the load retaining eyelets
on both sides and tension the cam lock by
pressing down the tongue and tensioning
the strap.
158
Front fitting
1. Fold out the safety net. Make sure that the
safety net's storage pockets are turned
backwards.
2. Place the seats as far forward as possible.
3. Hook one of the net's retaining hooks into
the front roof mounting.
Hook the net's other retaining hook into the
roof mounting on the opposite side.
Take care to press forward the net's retaining
hooks for each respective roof mounting's
front end position.
4. Hook the hook into the eyelet on the seat rail
on both sides and tension the cam lock by
pressing down the tongue and tensioning
the strap.
Related information
•
Loading (p. 154)
•
Safety grille (p. 159)
Advertisement
Table of Contents
